Pads & Drones (3.0-3.7); Utility Programs (3.8-3.9) - Lexicon PCM 81 - REV User Manual

Hide thumbs Also See for PCM 81 - REV:
Table of Contents

Advertisement

3.0
JurassicSolo
A very long plate reverb is pitched down a minor third. Spooky. Good for single-note
melody soundtracks. Stereo In/Stereo Out.
3.1
SwrlWhlNt
Swirling Whole Note — An LFO controls FX Width. FX Mix is 100% reverb. Delay time
is 0ms. Slightly detuned swirling voices produce a reverb that is especially wonderful on
whole notes. Stereo In/Stereo Out.
3.2
Sweet Chorus
An LFO sine wave alternates detuning from positive to negative pitch values. The pitch
of both outputs is positive, then negative. ADJUST changes both the speed and width of
detuning (faster=wider). Stereo In/Stereo Out.
3.3
MirrorChorus
An LFO square wave alternates detuning from positive to negative pitch values. The pitch
shift of the left output is the opposite of the right. Stereo In/Stereo Out.
3.4
LFO Detune
A slow, chorusy detuner. Stereo In/Stereo Out.
3.5
SpatialDuck
This preset produces a wash of detuned echoes with long reverb decay. The reverb
OutWidth is modulated to create spatial movement. The entire effect is ducked by input
level. (The reverb and echo decays increase as the level fades.) ADJUST controls the
amount of detuning.
3.6
Vibrato BPM
The vibrato produced by this effect is tempo controlled so it can be synchronized to the
beat. ADJUST sets the vibrato depth. Press Tap twice to lock-in the tempo.
3.7
Verbato
In this preset, a small stereo chamber reverb is routed through the stereo pitch shifter. The
pitch shifter is set to create vibrato. A nice way to thicken up a track without messing with
the dry sound.
3.8
Stereo VSO
Use this preset for pitch correcting stereo off-speed playback material. Set the Varispeed
parameter (in the first position of the Soft row) to match the amount of varispeed used
for playback. ADJUST controls the amount of reverb added to the corrected audio.
3.9
Mono VSO
Use this preset for pitch correcting mono off-speed playback material. Set the Varispeed
parameter (in the first position of the Soft row) to match the amount of varispeed used for
playback ADJUST controls the amount of reverb added to the corrected audio.
ADJUST:
Decay
ADJUST:
MasterDly
ADJUST:
Spd/Width
ADJUST:
Speed
ADJUST:
Detune
ADJUST:
cents +/–
ADJUST:
Depth
ADJUST:
Depth
ADJUST:
Rvb Mix
ADJUST:
Rvb Mix
0–100
Pads & Drones
(P5 3.0 – P5 3.7)
0–100
0–100
0–100
0–100
0–100
0–100
0–100
Utility Programs
0–100
(P5 3.8 – P5 3.9)
0–100
The Presets
4-27

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCM 81 - REV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents