Specifications - Lexicon Lambda Owner's Manual

Specifications

SPECIFICATIONS
Microphone Inputs:
Input Impedance:
Phantom Power:
GAIN:
EIN:
Maximum Input Level:
Frequency Response:
THD+N:
Insert Inputs:
Send Level (tip):
Maximum Return Level (ring):
Line Inputs:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Instrument Input:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Line Outputs:
Level:
Impedance:
Headphone Output:
MIDI Interface:
Sample Rate:
Dynamic Range:
A/D/A (24 Bit)
Power Requirements:
Dimensions:
Weight:
Lexicon engineers are constantly working to improve the quality of our products.Specifications are therefore
subject to change without notice.
32
(2) Female XLR Pin 2 Hot
600 Ohms balanced
+48 Volt
+44 dB
−120 dB A-weighted @ 44dB gain (150 Ohm source impedance)
6.5 dBu
+0, −0.5 dB 20 Hz - 20 kHz, ref. 1 kHz
<.005%, 20 Hz - 20 kHz
(2) 1/4" TRS
+10 dBu maximum
+11 dBu maximum
(2) 1/4" TRS balanced or unbalanced
20 kOhm balanced, 10 kOhm unbalanced
+13 dBu
+0, −0.5 dB 20 Hz - 20 kHz, ref. 1kHz
<.009% A/D, 20 Hz - 20 kHz
(1) 1/4" mono jack
1 MOhm unbalanced
+8.5 dBu
+0, −1 dB 20 Hz - 20 kHz, ref. 1 kHz
<.0125% A/D
(2) 1/4" TRS balanced or unbalanced
+16 dBu maximum
1 KOhm Balanced, 500 Ohm Unbalanced
(1) 1/8" stereo jack 20 mW per channel at 50 Ohms
5 pin DIN connectors for MIDI in and MIDI out
44.1 kHz or 48 kHz (determined by computer application)
A/D (24 Bit) 96 dB typical, A-weighted, 20 Hz - 20 kHz
D/A (24 Bit) 100 dB typical, A-weighted, 20 Hz - 20 kHz
95 dB typical, A-weighted, 20 Hz - 20 kHz
USB powered
6.5 x 6.7 x 3.4
1.92 lbs.