Requirements; About This Guide - Mitel 6863i Installation Manual

REQUIREMENTS

• SIP-based IP PBX system or network installed and running with a SIP account created for
the 6863i phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets
Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps).
• Category 5/5e straight-through cabling.
• Power source:
• For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an
Ethernet cable to connect from the phone directly to the network for power (no 48V AC
power adapter required if using Power-over-Ethernet [PoE]).
• For Ethernet networks that DO NOT supply power to the phone:
• Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no.
GT-41080-1848 (sold separately) to connect from the DC power port on the phone
to a power source
or
Use a PoE power injector or a PoE switch.

ABOUT THIS GUIDE

This manual describes how to physically set up your new 6863i SIP Phone. Not all features
listed are available by default and some may depend on your phone system or service provider.
Contact your system administrator if you have any questions on what features and services
are available to you on your system.
Welcome
2