Mitel 6863i SIP Phone Installation Guide
SHARED NETWORK CONNECTION
To connect a network device (such as a computer) to the phone, connect an Ethernet cable
into the network port on the back of the phone marked with
Ethernet cable into the network jack on the network device for which you are sharing the network
connection.
Notes:
1. The PC jack on the 6863i SIP Phone does not supply inline power onto other network
devices.
2. All Ethernet cables used must be Category 5/5e straight-through cables.
CONNECTING TO THE NETWORK AND TO POWER
POWER ADAPTER
Use the power adapter (sold separately) with your phone and plug your phone into a power
source.
WARNING: FOR POWER, USE ONLY THE GLOBTEK INC. LPS ADAPTER MODEL
NO. GT-41080-1848 (SOLD SEPARATELY) TO CONNECT FROM THE DC POWER
PORT ON THE PHONE TO A POWER SOURCE.
INLINE POWER
If your network provides 802.3af compliant inline power, the phone is powered through the
network.
1. On the back of your phone, connect an Ethernet cable into the network port marked with
2. Plug the other end of the Ethernet cable directly into the network jack on the wall.
Network Jack
(if inline power provided)
7
Ethernet Cable
j
. Plug the other end of the
j
To Network
.