Set The Date - Polar Electro FT1 User Manual

5. Wait until minutes start flashing on the display.
Adjust the value with the button when the minus or plus symbol is
displayed. The minus symbol is displayed two seconds after you have
increased a value.
6. When you have adjusted the values, wait until
the button to confirm your selection.
When you have set the time, the training computer returns to the Time display.

Set the Date

1. In the Time display, press the button five times.
2. Wait until the value for the day (in 24h format) or month (in 12h
format) is displayed and starts flashing.
Adjust the value with the button when the minus or plus symbol is
displayed. The minus symbol is displayed two seconds after you have
increased a value.
3. Wait until the month (in 24h format) or day (in 12h format) is
displayed.
Adjust the value with the button when the minus or plus symbol is
displayed. The minus symbol is displayed two seconds after you have
increased a value.
4. When you have adjusted the values, wait until
the button to confirm your selection.
DAY
5.
display
6. The weekdays are on the display frame, as follows:
MON
= Friday,
When the plus symbol is displayed, press the button to select the
weekday.
7. Once you have selected the weekday, wait until
press the button to confirm your selection.
is displayed and the weekday indicator flashes at the top of the
= Monday, TUE = Tuesday,
SAT = Saturday, SUN
OK? appears, and press
DATE is displayed.
OK? appears, and press
WED = Wednesday, THU = Thursday,
= Sunday
OK? appears, and
ENGLISH
FRI
Get Started 7