Polar Electro FT1 User Manual page 9

Your FT2 training computer automatically calculates your age-based heart rate limits once you have
entered your age in the user settings. However, in this display, you can adjust the limits manually. For FT1
training computer, the limits have to be adjusted manually.
(To skip this, press and hold the button until
4. HIGH
flashing.
Adjust the value. Increase the value when the plus symbol is
displayed. Decrease the value when the minus symbol is displayed.
The minus symbol is displayed two seconds after you have increased a
value.
5. When you have adjusted the value, wait until
the button to confirm your selection.
6. LOW
flashing. Adjust the value.
7. When you have adjusted the value, wait until
press the button to confirm your selection.
When you have completed the target heart rate settings, the training computer returns to the Time display.
EXIT is displayed.)
is displayed. Wait until digits for the upper heart rate limit start
The upper heart rate limit cannot be lower than the lower heart rate
limit.
is displayed. Wait until digits for the lower heart rate limit start
OK? appears, and press
OK? is displayed, and
Get Started
ENGLISH
9