Get Started; Set Up Your A360; Choose One Option For Setup: Computer Or A Compatible Mobile Device; Option A: Set Up With Your Computer - Polar Electro A360 User Manual

Hide thumbs Also See for A360:

Table of Contents

GET STARTED

When you get hold of your new A360, it's in storage mode. It wakes up when you plug it to a computer for

setup or a USB charger for charging. We recommend that you charge the battery before you start using your

A360. If the battery is completely empty, it takes a couple of minutes for the charging to start. See

for detailed information on charging the battery, battery operating times and low battery notifications.

You can choose how to set up your A360, with a computer and a USB cable or wirelessly with a compatible

mobile device.

mobile setup is convenient if you're always on the go and prefer not to use a computer, but it might take

longer.

wired setup is quicker and you can charge your A360 at the same time, but have to have a USB cable

and computer available.

1. Go to

flow.polar.com/start

ware

if needed.

2. Push down the top part (A) of the USB cover inside the bracelet to access the micro USB port and plug

in the supplied USB cable (B).

and install the FlowSync software to set up your A360 and

Batteries

update the firm-

Table of Contents