Non-Invite Transaction Timer - Siemens Asterisk OpenStage 20 Owner's Manual

3.4.9.3

Non-INVITE Transaction Timer

The NonCall trans timer is started whenever the phone sends a non-INVITE message to the
SIP server. If the timer expires before the phone gets a response from the SIP server, the phone
assumes that the server had died and then attempts to contact the backup server, if configured.
If no backup server is configured, the phone just tidies up internally.
The data is given in milliseconds. The default value is 32 000.
Administration via WBM
System > SIP interface
Administration via Local Phone
|
--- Administration
|
--- System
|
--- SIP Interface
|
--- NonCall transactions (ms)
A31003-S2000-M102-1-76A9, 06/02/2009
Asterisk - OpenStage Family, Administration Manual
administration.fm
Administration
System Settings
3-45