Set The Terminal Number - Siemens Asterisk OpenStage 20 Owner's Manual

inbetriebnahme.fm
Startup
Quick Start
2. Click on the tab "Administrator Pages". In the dialog box, enter the admin password:
3. The administration main page opens. The left column contains the menu tree. If you click
on an item which is printed in normal style, the corresponding dialog opens in the center
of the page. If you click on an item printed in bold letters, a sub-menu opens in the right
column.
2.3.2

Set the Terminal Number

If the user and administrator menus are needed in the course of setup, the terminal number,
which by default is identical with the extension number, must be configured first. When the
phone is in delivery status, the terminal number input form is presented to the user/administra-
tor right after booting. For further information about this setting, please refer to Section 3.4.1.1,
"Terminal Identity". With the WBM, the terminal number is configured as follows:
In the left column, select System > System Identity to open the "System Identity" dialog. Enter
the terminal number, i. e. the SIP name / phone number.
2-8
A31003-S2000-M102-1-76A9, 06/02/2009
Asterisk - OpenStage Family, Administration Manual