Transfer On Hangup - Siemens Asterisk OpenStage 20 Owner's Manual

administration.fm
Administration
Features - Configuration
3.5.2.2

Transfer on Hangup

This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the
call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled,
and A goes on-hook, B gets connected to C.
If Transfer on hangup is disabled, C will be released when A hangs up, and A has the possibility
to reconnect to B.
The default is "No".
Administration via WBM
System > Features > Configuration
Administration via Local Phone
|
--- Administration
|
--- System
|
--- Features
|
--- Configuration
|
--- General
|
--- Transfer on hangup
A31003-S2000-M102-1-76A9, 06/02/2009
3-52
Asterisk - OpenStage Family, Administration Manual