Siemens Asterisk OpenStage 20 Owner's Manual page 32

administration.fm
Administration
Access via Local Phone
OpenStage 60/80
If a parameter is set by entering a number or character data, the onscreen keypad is used.
i
Press the key to enter the editor. Within the editor, solely use the key numbers or the
Sensor Wheel for selecting numbers, characters, or groups of characters. The
letes one character in the input field, and the
The following figure describes the elements of the onscreen keypad and their functions:
Additionally, you can use the following keys on the keypad as shortcuts for the selection of
character groups
Element Function
*
Switch to punctuation and special characters.
#
Toggle between lowercase characters, uppercase characters, and digits.
OpenStage 20/40
With the OpenStage 20/40, use the keypad for entering parameters. With the 3 way/5 way-
Navigator, you can enter, delete, copy and paste characters and numbers as well as navi-
gate within an entry and toggle the input mode.
6. Save and exit
When you are done, select Save & exit and press
3-4
Element with focus
Letters, digits, punctuation marks or special characters
Command line
Copy contents of active field to clipboard
Insert clipboard contents at cursor position
Move cursor left/right
Shift to punctuation and special characters
Shift to numeric entry
Shift to upper/lower case
g
key moves the cursor to the OK field.
.
A31003-S2000-M102-1-76A9, 06/02/2009
Asterisk - OpenStage Family, Administration Manual
h
key de-