Forwarding; Ringer Off - Siemens Asterisk OpenStage 20 Owner's Manual

administration.fm
Administration
Features - Program Keys
3.6.3

Forwarding

If forwarding is enabled, the phone will forward incoming call to the predefined call number, de-
pending on the current situation.
The label displayed to the left of the key is defined in Key label <key number>.
The Forwarding type parameter determines the forwarding behaviour. If "All calls" is selected,
any incoming call will be forwarded. If "No reply" is set, the call will be forwarded when the user
has not answered within a specified timespan. The timespan is configured in the WBM user
pages under Configuration > Incoming calls > Forwarding > No replay delay (seconds). If "On
busy" is selected, incoming calls will be forwarded when the phone is busy.
Administration via WBM
System > Features > Program keys
3.6.4

Ringer off

Turns off the ringtone. Incoming calls are indicated via LEDs and display only.
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys
3-58
A31003-S2000-M102-1-76A9, 06/02/2009
Asterisk - OpenStage Family, Administration Manual