Setting Up Isdn Call Numbers (Msn); Set Up Call Number (Msn); Assigning Call Numbers (Msns); Assigning An Incoming Msn - Siemens Gigaset 4110 Comfort Operating Instructions Manual

Setting up ISDN call numbers
Step
by
step
(MSN)
Your ISDN connection provides you with 2 phone lines (B-channels) that can be
used at the same time. You can set up a maximum of 10 own call numbers
(MSN) on your base station. If you have not yet stored all the call numbers us-
ing the installation assistant (see page 26), you can do this now. All call num-
bers stored subsequently will automatically be assigned to all registered
handsets.

Set up call number (MSN)

Every newly set up call number will automatically be given its own ringer mel-
ody, which you can change individually. This will allow you to tell straight away
from the ring tone who the call is intended for.
Press
1.
Select using [
2.
Set up MSN
Select using [
3.
Select using [
4.
In this menu, you also have the option of setting another ringer melody and of
deleting or displaying the entry.
Enter new or modified MSN and/or names and confirm with [
5.
Select using [
6.

Assigning call numbers (MSNs)

You can now assign the registered handsets the previously set up call numbers
(MSN). In doing so you will specify
G the call numbers (there can be more than one) under which a registered ter-
minal will ring (receive MSN),
G the call number from which an internal subscriber should dial (outgoing
MSN). You can set one outgoing MSN for each internal subscriber. This
MSN is displayed to the called party and any call charges incurred are as-
signed to the appropriate subscriber (see also the table on page 24).

Assigning an incoming MSN

A newly registered handset will ring under all configured call numbers. If you
want to assign a specific incoming MSN to the handset:
Press
1.
Select using [
2.
Setup device
Select using [
3.
Select using [
4.
Now use [
5.
( in front of the menu item = ON/without = OFF).
*
for selection menus.
Z
] and [OK ]: Base Settings
|
.
Z
] and [ ]: (required MSN) .
Z
Edit entry
] and [OK ]:
Z
] and [OK ]: Save entry
*
for selection menus.
Z
] and [OK ]: Base Settings
|
.
Z
] and [ ]: (required internal subscriber) .
Z
] and [OK ]: Receive MSN

] and [OK ] to activate the required

Setting up ISDN call numbers (MSN)

→ →
Settings
.
.
→ →
Settings
→ (relevant MSN) .
Receive MSN
→
ISDN settings
|
].
→
Setup user
29