Charging With A Pc - NTT docomo Optimus LTE L-01D Instruction Manual

e
Insert the AC adapter L03 plug into the
outlet
• Charging begins. The charge indicator turns
OFF during charging.
• After charging is completed, a message
explaining that charging is completed is
displayed on the screen.
f
When charging is completed, remove
the terminal according to the reverse
procedure while holding the desktop
holder L12
g
Remove AC adapter L03 plug from
power outlet
„ Charging by attaching only the battery
pack
You can insert the battery pack to the slot opening
for the battery pack on the top surface of the desktop
holder L12 for charging. The charge indicator turns
red during charging. After charging is completed,
the charge indicator turns green.
„ Charging by attaching the battery pack
and terminal together
Charging begins for the terminal first. The charge
indicator turns OFF while the terminal is charging.
After charging of the terminal is completed, the
battery pack begins to charge. At that time, the
charge indicator turns red.

Charging with a PC

a
Open the microUSB connector terminal
cover of the terminal
b
Insert the microUSB connector of USB
connection cable L02 into the microUSB
connection terminal of the terminal
c
Connect USB connector of USB
connection cable L02 to PC USB port
d
"Charge only" u "OK"
• For details about the connection method
between the terminal and PC, refer to
"Connecting the Terminal with a PC" (P138).
e
When charging is completed, remove
the microUSB connector from the
terminal and close the microUSB
connector terminal cover
f
Remove the USB connector from the PC
USB port
Confirmation and Settings before Using
39