NTT docomo Optimus LTE L-01D Instruction Manual page 50

Connecting to a Wi-Fi network
a
From the Home screen,
u "Wireless & networks"
• The "Wireless & network settings" screen
appears.
b
Place a check mark on "Wi-Fi"
c
"Wi-Fi settings"
• The "Wi-Fi settings" screen appears.
d
Tap the Wi-Fi network that you want to
connect to
• If you try to connect to a protected Wi-Fi
network, you will be prompted to enter the
security key for that Wi-Fi network. Tap the
"Password" box, enter the network password
and tap "Connect".
• Usually, when you enter a password, the last
character entered is displayed and as many
" ・ " as the number of characters appear instead
of previously entered characters. All characters
can be displayed when you place a check mark
on "Show password".
48
Confirmation and Settings before Using
Note
• There are two types of available networks - open
u "Settings"
• The icon also indicates the signal strength.
• To search Wi-Fi network again, from the Home
• Network name does not appear depending
• When establishing a Wi-Fi network connection,
• To check the Wi-Fi MAC address and IP
networks and protected networks. The network
type is indicated by an icon to the network
name. represents an open network and
represents a protected network.
Strong signal
Weak signal
screen, tap u "Settings" u "Wireless &
networks" u "Wi-Fi settings", and then tap
"Scan".
on the settings for the access point even if the
network is connectable. If this happens, you can
still connect to the network. Refer to "Adding a
Wi-Fi network" (P50).
the required information is generally obtained
from a DHCP server automatically. However, it is
possible to specify these items separately.
address, from the Home screen, tap
"Settings" u "Wireless & networks" u "Wi-Fi
settings", and then tap u "Advanced".
u
u