Settings For Network Connection At Overseas - NTT docomo Optimus LTE L-01D Instruction Manual

Settings for Network
Connection at Overseas
When you use the terminal overseas, it is necessary
to switch to the network of an operator that can be
connected to in the country you are staying.
At the time of purchase, the terminal is set to
automatically search for and then switch to a network
that can be connected to but you can also change the
settings manually.
Setting Network Mode
a
From the Home screen,
u "Wireless & networks" u "Mobile
networks" u "Network Mode"
b Tap a prior network mode to use
• Automatic: Select LTE / 3G network or GSM/
GPRS network automatically to use.
• GSM only: Only use GSM/GPRS network.
Note
• If you change the Network mode while using
data communication, the data communication
will be stopped and the Network service will be
disconnected.
Searching an Available Network
and Setting Manually
a
b
Note
• If you manually set the operator to connect, the
u "Settings"
• If you manually set the operator to connect to,
• If you tap "Network operators" while using
• Tap "Network operators" while using data
From the Home screen,
u "Wireless & networks" u "Mobile
networks" u "Network operators"
• The "Available networks" screen appears.
"Search networks" / "Select
automatically"
terminal will not automatically switch to another
operator that can be connected to when you
move out of the service area.
set "Select automatically" after you return to
Japan.
data communication over a 3G network, the
message, "Network with Limited Service found.
Do you want to initiate a Network Search?"
appears. Tap "Yes" to stop data communication
and search for networks.
communication over a GSM/GPRS network
to stop data communication and search for
networks.
u "Settings"
205
Using Overseas