1. Manuals
  2. Brands
  3. NTT docomo Manuals
  4. Cell Phone
  5. L-03F
  6. Instruction manual

NTT docomo L-03F Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Contents/Precautions
L-03F
'14.x
Before Using this Terminal
Setting Up
L-03F Connection Manager
Mobile Broadband
Configuring Network Manually
Overseas Use
Appendix/Troubleshooting

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-03F and is the answer not in the manual?

Questions and answers

Related Manuals for NTT docomo L-03F

Summary of Contents for NTT docomo L-03F

  • Page 1 Contents/Precautions L-03F ‘14.x Before Using this Terminal Setting Up L-03F Connection Manager Mobile Broadband Configuring Network Manually Overseas Use Appendix/Troubleshooting...
  • Page 2 This terminal supports SIM unlock. If you release SIM lock, Before using your terminal, or when necessary, read this you can use SIM by a carrier other than NTT DOCOMO. manual to ensure safe use and handling. • The SIM unlock service is provided at a docomo Shop.

  • Page 3: Basic Package

    Basic Package ■ L-03F Terminal (With Back cover L30, Warranty) ■ USB Extension Cable (Sample) ■ L-03F INSTRUCTION MANUAL for Connection Guide...

  • Page 4: How To Read This Manual

    How to Read this Manual Contents L-03F Manual is composed of "L-03F INSTRUCTION MANUAL for Connection Guide" and "L-03F INSTRUCTION MANUAL" (this manual). ■ "L-03F INSTRUCTION MANUAL for Connection Guide" The following contents such as connection to computer, troubleshooting, specifications of L-03F are described.

  • Page 5: Table Of Contents

    Basic Package ･･････････････････････････････････････ 1 Configuring Windows Version How to Read this Manual････････････････････････････ 2 Network Contents ････････････････････････････････････････････ 3 Manually Features of the L-03F ･･･････････････････････････････ 4 Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) ･････････････････････････････････････ 5 International Roaming Service (WORLD WING) Handling and Care･････････････････････････････････ 11 Overseas...

  • Page 6: Features Of The L-03F

    Features of the L-03F "Xi" is a service of DOCOMO supported by LTE (Long Term Evolution) which is the international communication standard. FOMA (Freedom Of Mobile multimedia Access) is the name of a service provided by DOCOMO based on the W-CDMA system, which is certified as one of the global standards of 3rd generation mobile communication systems (IMT-2000).
  • Page 7 ■ The following symbols indicate special warnings regarding product usage. Safety Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) Denotes things not to do (prohibition). ■ Before using this terminal, read these "Safety Precautions" carefully so that you can use it properly. Denotes not to disassemble. After reading the safety precautions, keep this manual in a safe place for later reference.

  • Page 8: General Precautions For This Terminal And Uim

    WARNING General Precautions for this Terminal and UIM Do not subject this terminal and its accessories to strong force, severe shocks, or throw them. DANGER Fire, burns, injury, or electric shock may result. Do not use, store or leave the terminal in hot places (e.g.

  • Page 9: Precautions For This Terminal

    CAUTION Precautions for this Terminal Do not place this terminal or UIM on unstable locations such as wobbly tables WARNING or slanted locations. This terminal or UIM may fall, resulting in Do not get liquids such as water or foreign injury.
  • Page 10 Remove this terminal from USB port in CAUTION places near high-precision electronic devices or devices using weak electronic Do not use the broken terminal. signals. Fire, burns, injury, or electric shock may Electronic devices may be adversely result. affected by reasons such as malfunction. ※...

  • Page 11: Precautions For The Uim

    WARNING Precautions for the UIM Be sure to adhere to the following regulations inside medical facilities. CAUTION ●Keep this terminal out of operating Be careful not to touch the edge of UIM rooms, intensive care units (ICUs) or when removing it. coronary care units (CCUs).
  • Page 12 If you use medical equipment such as an implanted cardiac pacemaker or implanted Material List defibrillator, use the mobile terminal 22cm or more away from the implanted cardiac Material/Surface pacemaker or implanted defibrillator. Part treatment Operation of medical equipment may be Exterior case (Front part) adversely affected by radio waves.

  • Page 13: Handling And Care

    ■Do not place the equipment near air conditioner outlets. Handling and Care Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction. General Usage Guidelines ■Do not place this terminal where excessive force ■Keep this terminal away from water.
  • Page 14 ■Do not insert a USB connector to PC crookedly ■Do not drop or give shock to the UIM . or do not pull it when it is inserted. Malfunction may result. Damage or malfunction may result. ■Do not bend or put heavy things on the UIM. ■Remove this terminal from the PC when Malfunction may result.
  • Page 15 Before Using this Terminal Names of Parts and Functions･･･････････････････ Using UIM････････････････････････････････････････ Available Communications ･･･････････････････････ Connecting this Terminal to a PC････････････････...

  • Page 16: Names Of Parts And Functions

    Names of Parts and Functions USB Connector A connection terminal used to connect with PC Communication Status Lamp→ Indicates status of this terminal Xi antenna Part The antenna is built in this terminal. Back cover Cover to protect UIM attaching part Pulling out a: Example 1: Example 2:...

  • Page 17: Using Uim

    Mode Indication Lamp Using UIM A UIM is an IC card that stores personal information such as your phone number. Without the UIM installed in this terminal, you cannot use data communication. For detailed information, refer to UIM Manual. You can use the terminal only with UIM. Exchange your docomo mini UIM card or FOMA card at a docomo Shop.
  • Page 18 Insert a UIM under the card slot in the Removing direction of arrow with the IC chip side down Remove a UIM holding the terminal with both hands. Press the back cover in the direction to slide it in the direction b. Then pull it up in the direction to remove Notch...
  • Page 19 Fit the back cover to the ditch of this terminal at approximately 1mm. While pushing in the Security Code direction of a, slide the back cover in the You can set PIN1 code (Personal Identification Number) direction of until it clicks for UIM.
  • Page 20 Activate L-03F Connection Manager Caution PIN1 code Verification screen appears • Do not set PIN1 code to numbers that can easily make a guess, such as "birth date", "part of your phone number", "numbers from address or room number", "1111" "1234", Enter PIN1 Code etc.

  • Page 21: Available Communications

    Note Available Communications • Communication fees become high when performing communications with large amount of data such as browsing websites with many graphics or downloading data. Xi Data Communication/FOMA Packet • Data communication may take more time or become Communication difficult to connect depending on the network congestion.

  • Page 22: Connecting This Terminal To A Pc

    When connecting this terminal with a PC for the first time, Fees to an ISP may be required to connect to the it is required to install L-03F Connection Manager Internet. These fees are added to the Xi service fees and (including a driver).
  • Page 23 Hold the connector part of the USB extension cable and Hold the connector part of the USB cable and insert it insert into the USB connector of this terminal in into PC's USB port in direction of arrow with inscription direction of arrow of the USB side up * Firmly insert into the USB connector.
  • Page 24 ■ When connecting with a PC directly Insert the USB connector of this terminal into the PC's USB port • The tip of the USB connector on the terminal can be rotated 90 degrees according to the orientation of your PC. Put your fingertip on the lug of the USB connector to pull out 90 degrees USB port...
  • Page 25 Removing • Using "Mobile Broadband" (→P63) Disconnect data communication • Configuring manually (→P69) If the L-03F Connection Manager is running, or L-03F APN Note Tool is running, close it first. Make sure the data connection is disconnected. Remove this terminal ■...
  • Page 26 Hold the connector part of the USB extension cable and Place the USB connector into this terminal pull out from the USB connector in direction of arrow USB connector USB Connector ※ Place the USB connector with the lug shown at the front.
  • Page 27 Rotate the tip of the USB connector 90 degrees as shown Connector Place the USB connector into this terminal USB Connector Caution • If you force to remove this terminal or try to pull out the USB connector, malfunction may result. •...
  • Page 29 Setting Up Setting Up ･･･････････････････････････････････････ Windows Version ････････････････････････････････ Mac Version ･････････････････････････････････････...

  • Page 30: Setting Up

    Data communication is available with only L-03F Connection Manager, if necessary using Mobile Broadband (Windows 7 only) is also available. For PC with Windows OS in it, data communication is also available based on configuring manually after installing L-03F Connection Manager.
  • Page 31 Work Flow of Setting Up Connecting this terminal with a PC ・ Windows VersionP32 ・ Mac VersionP41 Installing L-03F Connection Manager, Communication configuration file (Driver), L-03F APN Tool (Windows only) (Standard installation/Custom installation) Confirmation after Setup ・ Windows VersionP36/・ Mac VersionP45...
  • Page 32 For latest information of operation environment, visit NTT DOCOMO website. Operating Environments Using this terminal under the following operational Note environments. • The software may not work depending on your operating Item Requirement system environment and type of machine. DOCOMO does not guarantee any operation other than the operation PC Main •...

  • Page 33: Windows Version

    • When installing, insert this terminal into USB port after OS is activated. Installation of L-03F Connection Manager is only required • Do not remove this terminal while installing. when connecting this terminal to your PC for the first time.
  • Page 34 [Next] automatically installed by zero installation. When the installation finishes, the message, "Device driver software installed successfully." appears, then L-03F Connection Manager setup screen appears. "AutoPlay" screen will be displayed depending on settings of the PC. If the screen is displayed, check "Always do this for software and games:"...
  • Page 35 Custom installation On the "Select the installation method" screen, select "Custom installation" and click [Next] Select "Install all of L-03F Connection Manager, L-03F APN Tool, and L-03F USB Driver. (Recommended)" or "Install L-03F USB driver only", then click [Next] Setting Up...
  • Page 36 If this terminal is recognized properly, "Your device is ready to use" will appear. • To install all, also set "Profile setting"  "Automatic connection setting". • If you install L-03F USB driver only and make packet communications, connect in the manner in Mobile ■ For Windows Vista Broadband (→P65) or Configuring Network Manually...
  • Page 37 Installing Flash Player • On the right side of the taskbar, "Found New Hardware" If Flash Player is installed into your PC, screen shown in "Confirming L-03F Connection Manager" (→P36) appears appears, and this terminal is recognized automatically. and setup finishes.
  • Page 38 Note • Alternatively, remove this terminal from the PC, and then reconnect to check. • For Windows 7, L-03F Connection Manager cannot be activated due to the setting of mobile broadband auto connection. Set to "Never connect automatically". →P65 Setting Up...
  • Page 39 Confirming the Installed L-03F Communication name installed Configuration File (Drivers) • Confirm whether the driver name is displayed below Confirm whether L-03F Communication Configuration File "Network adapters", "Ports (COM & LPT)", "Modems", (Drivers) is set in a PC. "Universal Serial Bus controllers".
  • Page 40 • When using mobile broadband of Windows 7 to Universal Serial USB Composite Device communicate data, set in mobile broadband. →P65 Bus controllers • When communicating data with neither L-03F Connection Manager nor Mobile broadband of Windows 7, configure it manually.→P70 Setting Up...
  • Page 41 Manager"  "Uninstall L-03F Connection Manager". ■ For Windows XP • Click [start]  "All Programs"  "L-03F Connection Click [No] if you do not want to delete user data. Manager"  "Uninstall L-03F Connection Manager". • Even if you click [Yes], APN information is not deleted.
  • Page 42 ■ For Windows XP Installing L-03F USB driver only • Mark "Clear communication settings (W-TCP setting) (Recommended)" on the "Delete communication (Start)  Click "Control Panel"  settings" screen, then click [Next] to display the screen "Programs"  "Uninstall a program" ...

  • Page 43: Mac Version

    Preparation before Using L-03F Mac Version Setting via this Terminal Installation of L-03F Connection Manager is only required to install when connect this terminal to your PC for the Turn on the PC and activate OS first time. ※The following images are the examples of "Mac OS X 10.6.8".
  • Page 44 Double click "Installer.mpkg" Click [Continue] Click [Continue] Read "Software License Agreement" and click "Agree" if you agree to continue installation Setting Up...
  • Page 45 Click [Install] Click [Continue Installation] ■ If a selection screen for installation destination appears • Select an installation destination, click [Continue]  [Install]. Select "Standard installation (recommended)", click [Continue] ■ To change installation destination • Click [Change Install Location...], then specify installation destination.
  • Page 46 ■ Custom installation cSelect "ON (recommended)" or "OFF" on the "Automatic connection setting" screen, then click [Continue] aSelect "Custom installation", click [Continue] bMake settings on the "Profile setting" screen, then click [Continue] Click [Restart] The PC restarts. Installation finishes. Remove this terminal from the PC temporarily. Setting Up...
  • Page 47 Select "docomo L03F" and click [Apply] Confirming after Installation Confirming L-03F Connection Manager Connect this terminal with the PC Drag the CD-ROM icon displayed on the desktop into trash bin This terminal will be recognized as a modem. Click [Network Preferences...] ■...
  • Page 48 Double click to launch Finder  "Applications"  ■ Installing Flash Player A message appears when activating the L-03F "L-03F_Connection_Manager" Connection Manager for the first time if Flash Player is not installed in your PC. Install Flash Player following the When the following screen is displayed, the confirmation of procedures below.
  • Page 49 Connect to a PC CD-ROM icon is displayed on the desktop. Click [DONE] Double click the CD-ROM icon Double click "Uninstaller" Installation finishes. Note Click [Uninstall] • When communicating data via L-03F Connection Manager, settings of L-03F Connection Manager is required.→P54 Setting Up...
  • Page 50 Enter administrator password  Click [OK] Click [Restart] Remove this terminal from the PC Uninstallation finishes. Setting Up...
  • Page 51 Settings ･････････････････････････････････････････ L-03F Connection Manager is available on either Windows or Mac. Despite the display images of Windows version and Mac version may differ, icons on screen and available functions are the same. Please note that the descriptions in this...
  • Page 52 Connect to a PC UIM, set network (only during international roaming), • When connected to a PC, the L-03F is recognized as a CD- automatically connect, set language, check latest software, ROM first and a CD-ROM icon appears on the desktop.
  • Page 53 3rd generation (3G) and 4th generation (4G) mobile phone. It is known as "3.9G". ※6 "GPRS" (Short for General Packet Radio Service) Home screen (→P51) GPRS is the 2.5 generation mobile communication system that enables high speed packet communication using GSM. Setting screen (→P54) L-03F Connection Manager...
  • Page 54 "Operator name display" is set to "Show". (→P92) Connect this terminal with a PC APN name area • For Windows, L-03F Connection Manager is activated • Current APN name is displayed. automatically. For Mac, activate L-03F Connection Manager manually.
  • Page 55 ON does not reconnect automatically. To execute packet communication again, click • For Mac OS, when L-03F communication device is not set, a message "The "docomo L03F" network interface has not been set up. To set up this interface, use Network Preferences."...
  • Page 56 Settings for overseas use broadband of Windows 7, communication via mobile such as roaming can be broadband may start when L-03F Connection Manager is made. closed. Not to connect automatically, set to "Never connect automatically" in auto connection setting of...
  • Page 57 Click [Set] ：Click to reset all the amount. A message to confirm is displayed. Note Click [Yes] • The data usage displayed on the screen may differ from the Click [OK] actual volume of packet communication. L-03F Connection Manager...
  • Page 58 DOCOMO UIM card setting screen is displayed. Click [OK] Note • If you lock PIN1 then remove and insert this terminal, PIN1 code entry screen appears when L-03F Connection Manager restarts. Enter a correct PIN1 code to use this terminal. L-03F Connection Manager...
  • Page 59 In "Confirm new PIN1 code", enter the PIN1 code that has been entered in "New PIN1 • If PIN1 is unlocked, you can use UIM information from this terminal without verifying PIN1 code. code" code again Click [Set] Click [OK] L-03F Connection Manager...
  • Page 60 • If you improperly enter the PIN1 code 3 times in a row, • When L-03F Connection Manager is started after setting PIN1 the unblocking PIN code entry screen will be displayed. lock or it is restarted to reset this terminal, PIN1 code input screen will appear.
  • Page 61 Making Automatic connection setting Setting language • Set whether to automatically connect to the Internet when • Select Japanese or English as a display language for L-03F L-03F Connection Manager is activated. Connection Manager. • Automatic connection setting is not available during Click "Language setting"...
  • Page 62 Checking the version information Setting to check the latest software Click on the title bar in the L-03F Connection Manager screen to display information about L-03F Connection • Set whether to automatically check the latest software each Manager software. time L-03F Connection Manager is activated.
  • Page 63 Setting screen Click This terminal starts resetting. After the reset finishes, it will return to the Home screen. • A message "L-03F is not recognized" may temporarily be displayed. This terminal will be detected after a while. L-03F Connection Manager...
  • Page 65 Mobile Broadband Mobile Broadband･･････････････････････････････ Connecting through Mobile Broadband ････････ Disconnecting Mobile Broadband ･･････････････ Changing APN Settings ･･･････････････････････ Setting UIM････････････････････････････････････...
  • Page 66 Viewing Screen Mobile Broadband ■ APN screen Use the mobile broadband installed in Windows 7 to communicate packet. Only Windows 7 supports mobile broadband. In this manual, operations such as connecting/ disconnecting mobile broadband, changing APN or setting PIN lock are described. Visit Microsoft website for detailed information.
  • Page 67 ■ Property screen for setting each item Connecting through Mobile Broadband Connect this terminal with a PC ■ When connecting for the first time Click if network connection is not made) or the task tray displayed on the bottom right Right click "DOCOMO"...
  • Page 68 Enter PIN1 code after the screen appears. Connect this terminal with a PC • When mobile broadband is used to connect data communication, L-03F Connection Manager and dial-up connection are not available. Click if network connection is not made) "Disconnect"...
  • Page 69 Note Setting UIM • If connect mobile broadband under PIN validation, PIN1 code entry screen is displayed. In this case, this terminal cannot normally function with wrong PIN1 code. • [Enable PIN...], [Disable PIN...] and [Change PIN...] can be performed on UIM. •...
  • Page 71 Configuring Network Manually Windows Version ････････････････････････････････...
  • Page 72 Set the access point (APN) in packet communication of dial-up connection. Up to 10 APN can be set up and they are managed with cid's. • While L-03F Connection Manager is activated, L-03F APN Tool cannot be activated. • The registration number (cid) 1 is pre-installed to mopera.net.
  • Page 73 Enter the APN in "APN" field  Click [Set] Setting APN Without Using L-03F APN Tool Describe how to set an APN by using "Hyper Terminal" attached on standard Windows XP. • Windows 7 and Vista do not support "Hyper Terminal". Setting with software compatible with each OS is required.
  • Page 74 Click [Cancel] on connection screen Confirm if "OK" is displayed The Hyper Terminal screen opens. Click "File"  "Exit" Enter the APN in the following format Click [Yes] on confirming disconnection Press screen Click [No] on the confirming to save ...
  • Page 75 Select "Set up a dial-up connection"  Click [Next] Configuring Dial-up Network Manually Set up the dial-up network on the PC. • For setting up a connection to other than "mopera U", contact your ISP or network administrator. Example: Connecting to the DOCOMO Internet connection service "mopera U", which is registered to <cid>=1 For Windows 7 (Start) ...
  • Page 76 When the modem selection screen appears, Configure each setting, then click [Connect] click "docomo L03F Modem Driver" • Enter *99***<cid># in the "Dial-up phone number". Enter the registration number of an APN set in <cid>. (→P70) The modem selection screen opens only if two or more modems are connected to a PC.
  • Page 77 (Start)  "Control Panel"  "Network Click "Skip" on the "Connecting to (APN)..." Click and Internet"  "Network and Sharing Center" screen The connection test will not be performed. Only the settings "Change adapter settings"  Select the will be checked. created dial-up icon ...
  • Page 78 Click "Networking" tab  Configure each Click the "Options" tab  Click [PPP setting Settings...] The settings for "QoS Packet Scheduler" in "This connection Remove check marks from all items  Click uses the following items" field should follow your ISP or network administrator.
  • Page 79 Select "Set up a dial-up connection"  Click For Windows Vista [Next] (Start)  "Connect to" Click Click "Set up a connection or network" Configuring Network Manually...
  • Page 80 When the modem selection screen appears, Configure each setting, then click [Connect] click "docomo L03F Modem Driver" • Enter *99***<cid># in the "Dial-up phone number". Enter the registration number of an APN set in <cid>. (→P70) The modem selection screen opens only if two or more modems are connected to a PC.
  • Page 81 Click "Set up the connection anyway"  Click [Skip] on the "Connecting to (APN)..." screen [Close] The connection test will not be performed. Only the settings will be checked. • If you do not click [Skip], the connection to the Internet will be established.
  • Page 82 Click "Networking" tab  Configure each item Check the settings on the "General" tab window The settings for "QoS Packet Scheduler" in "This connection uses the following items" field should follow your ISP or If two or more modems are connected to a PC, enable only network administrator.
  • Page 83 Click the "Options" tab  Click [PPP For Windows XP Settings...] Click [start]  "All Programs"  Remove check marks in all items  Click [OK] "Accessories"  "Communications"  "New Connection Wizard" On the "New Connection Wizard" screen, click [Next] On the "Options"...
  • Page 84 Select "Connect to the Internet"  Click Select "Connect using a dial-up modem"  [Next] Click [Next] Select "Set up my connection manually"  If "Select a Device" screen appears, check in "Modem - docomo L03F Modem Driver" check Click [Next] box ...
  • Page 85 Enter a name in the "ISP Name" field  Click Select the connection usage range  Click [Next] [Next] Select a user. • Depending on the PC settings, this screen may not appear. Fill in the "User name", "Password", and "Confirm password"...
  • Page 86 Select the created dial-up connection icon  Click [Finish] Right click  Click "Properties" Click [start]  "All Programs"  "Accessories"  "Communications"  "Network Connections" Configuring Network Manually...
  • Page 87 Click the "Networking" tab  Confirm each Check the settings on the "General" tab window item • If two or more modems are connected to a PC, enable only • Select "PPP: Windows 95/98/NT4/2000, Internet" in the "Modem - docomo L03F Modem Driver" in the "Connect "Type of dial-up server I am calling"...
  • Page 88 If a different terminal is connected, L-03F Connection Manager (including a drivers) Click [OK] on the "Networking" tab window may need to be reinstalled. • When set PIN1 lock using L-03F Connection Manager, start after unlocking PIN1. (Start)  "Control Panel"  "Network Click and Internet"...
  • Page 89 Enter "User name" and "Password"  Click [Dial] Disconnecting Communication The APN will be connected. Exiting the Internet browser may not terminate the • To connect to "mopera U", you can leave the " User name" connection. Perform the following steps to terminate the and "Password"...
  • Page 91 Overseas Use International Roaming Service (WORLD WING) ･･ Services Available Overseas ････････････････････ Before Using Overseas ･･････････････････････････ Setting the Searching Method for Available Networks ･･････････････････････････････････････ Configuring Network･･･････････････････････････...
  • Page 92 • Before using this terminal overseas, see the following items. "International Service Website". - "Mobile Phone User's Guide [International Services]" • L-03F does not support voice call or video telephony - DOCOMO International Services website features. • For areas out of Xi area such as overseas, connect to 3G or GPRS network.
  • Page 93 ■ Automatic connection for Mobile Broadband • Note that if you use packet communication overseas using Windows 7 mobile broadband with the automatic connect Before Using Overseas setting to "Always connect automatically", (→P65) communication fees may become extremely high. STEP1：Before Leaving Japan STEP2：While Overseas STEP3：After Coming Back to Japan While Overseas...
  • Page 94 After Coming Back to Japan Configuring Network After coming back to Japan, you can use within Xi area or • Allow you to configure network by L-03F Connection Manager. FOMA area. • Available if you come back to Japan with international roaming ■...
  • Page 95 Specify a search method from "Network Specify whether to show or hide the network search method" information in "Operator name display" ■ [Automatic search] ■ [Show] Network can be searched automatically. • The name of the network receiving current service is displayed on the screen.
  • Page 96 Note • While using overseas - If "Network search method" is set to "Automatic search", this terminal will search the available carrier automatically and connect again if move to an area out of service. - Some communication services may not be available depending on the overseas carrier or network.
  • Page 97 Appendix/Troubleshooting AT Commands ･･･････････････････････････････････ AT Command List････････････････････････････････ Options and related devices ･････････････････････ 112 Troubleshooting ･････････････････････････････････ 113 Error Messages･･････････････････････････････････ 116 Warranty and After-Sales Service ･･･････････････ 117 Updating Software･･･････････････････････････････ 118 Main Specifications ･･････････････････････････････ 119 Export Administration Regulations ･･････････････ 121 Intellectual Property Rights ･････････････････････ 123 Index･････････････････････････････････････････････...
  • Page 98 AT Commands AT commands are used to check this terminal function settings or status by using a PC. Usually, the communication software issues AT commands so you do not need to be concerned about them. Use AT commands if you want to control this terminal in your own way. Form of AT Commands AT commands should be entered on the Terminal Mode screen of the communication software.
  • Page 99 AT Command List The following AT commands can be used on the "L-03F" modem port. • [&F]：A command to initialize settings used as AT&F command. • [?][=?]：The current settings appear when adding "?" at the end of the command, and the effective range of the current settings appears when adding "=?"...
  • Page 100 Examples of Command Overview Parameters/Description Commands AT+CEREG=<n> Set if notify EPS network ＜n＞： Set if send unsolicited result code AT+CEREG? registration. n=0： Do not send unsolicited result code +CEREG: [&F] [?] [=?] (default) 2,1,"00C3","01","00 n=1： Send network registration status as 00C4D1",7 unsolicited result code n=2：...
  • Page 101 Examples of Command Overview Parameters/Description Commands AT+CGEQMIN Register criteria value for Refer to P111 Refer to P111 [?] [=?] determining if QoS (Quality of Service) sent from network when PPP Packet communication is established is acceptable or not. AT+CGEQREQ Set QoS(Quality of Service) to Refer to P111 Refer to P111 [?] [=?]...
  • Page 102 Examples of Command Overview Parameters/Description Commands AT+CGREG=<n> Set if notify GPRS network ＜n＞: Set if send unsolicited result code AT+CGREG? registration. n=0：Do not send unsolicited result code +CGREG: [&F] [?] [=?] (default) 2,1,"00C3","0000C n=1：Send network registration status as 4D1",2,"01" unsolicited result code n=2：Send network registration status and location information as unsolicited result code...
  • Page 103 Examples of Command Overview Parameters/Description Commands AT+CIND The signal status of this terminal is <battchg> AT+CIND? battchg=0∼5 : Battery charge level +CIND:5,5,1 [?] [=?] displayed. Execute "AT+CIND=?", then appears as * Not supportive. "+CIND:<battchg>,<signal>,<servi ce>". <signal> signal=1 : 0 or 1 bar of antenna is displayed AT+CIND=? +CIND:("battchg",(0 signal=3 : 2 bars of antenna are displayed...
  • Page 104 Display in the form of "+CMEE ERROR: +CMEE:0 xxxx" (where xxxx are text) ※ If using ATZ or AT&F command to default, "0" is setup. Note that when connecting L-03F to AT+CMEE=? +CMEE:(0-2) power, the value of ATZ or AT&F command differs.
  • Page 105 Examples of Command Overview Parameters/Description Commands AT+COPS= Select network operator and set. ＜mode＞ Parameter is supporting 0-4. AT+COPS=0 〔<mode>〔,<format> 〔,<oper>〔,<AcT> ＜format＞ Parameter is only supporting 〕 〕 〕 〕 2(default). AT+COPS? [?] [=?] +COPS:0 ＜oper＞ MCC+MNC For example, if PLMN Number is 440 (MCC) 10 (MNC), ＜oper＞="44010".
  • Page 106 Examples of Command Overview Parameters/Description Commands AT+CPAS Display this terminal state. Displays in the form of "+CPAS : <n>". AT+CPAS [=?] +CPAS:0 n=0: Available n=1: Unavailable n=2: Unclear n=3: Available and while incoming call receiving n=4: Available and communicating AT+CPIN="PIN"/ Command to enter the PIN1 code or Enter the PIN1 code for "PIN", and enter (+CPIN:SIM PIN...
  • Page 107 Examples of Command Overview Parameters/Description Commands AT+CR=<mode> Set if display service report. <mode> AT+CR=0 [&F] 0 : Do not return report (default). [?] [=?] 1 : Return report. AT+CR? +CR:0 AT+CREG=<n> Set if notify EPS network ＜n＞: Set if send unsolicited result code AT+CREG=0 [&F] registration and make an inquiry.
  • Page 108 Examples of Command Overview Parameters/Description Commands AT+GCAP Display the capability list of this AT+GCAP terminal. +GCAP: +CGSM,+W AT+GMI Display the manufacturer of this AT+GMI terminal. LG Electronics Inc AT+GMM Display the name of this terminal. AT+GMM docomo L03F AT+GMR Display the S/W version of this AT+GMR terminal.
  • Page 109 Examples of Command Overview Parameters/Description Commands AT+WS46=<n> Set the wireless network to be used n=12 : 3GPP Systems AT+WS46=12 [?] [=?] by this terminal when dialing. *For AT+WS46？ , the answer is only 25. AT+WS46? Retry a command just before is not needed after entering command.
  • Page 110 Examples of Command Overview Parameters/Description Commands ATI<n> Display the recognition code. n=0 : Display [NTT DOCOMO, INC.] NTT DOCOMO, INC. n=1 : Display the name of this terminal (Same as +GMM). n=2 : Display this terminal version (same as +GMR). ATI0 n=3 : Display OK.
  • Page 111 Examples of Command Overview Parameters/Description Commands ATS3=<n> Set the return character (CR) to Only n=13 (default) can be specified. ATS3=13 [&F] [?] recognize the end of AT command text string. ATS4=<n> Set the line feed (LF) character. It is Only n=10 (default) can be specified. ATS4=10 [&F] [?] positioned next to the return...
  • Page 112 Examples of Command Overview Parameters/Description Commands ATX<n> Set if detect dial tone. n=0 : No busy tone detected, no dial tone ATX1 [&F] detected, no speed display n=1 : No busy tone detected, no dial tone detected, speed display detected n=2 : No busy tone detected, dial tone detected, speed display detected n=3 : Busy tone detected, no dial tone...
  • Page 113 ■ Command name: +CGEQMIN=[Parameter] • Overview Supplementary Explanation of AT Register the threshold to accept the QoS (Quality of Commands Service) sent from the network when packet communication is established. ■ Command name：+CGDCONT LTE data communication is not supported. • Overview •...
  • Page 114 (4) Command to permit all speeds for upload and only 7,232kbps for download (When cid=4) Result Codes AT+CGEQMIN=4,,,7232 ■ List of result codes ■ Command name: +CGEQREQ=[Parameter] Numeric • Overview Text display Description display Set the QoS (Quality of Service) requested to the network when packet communication is dialed.
  • Page 115 This terminal is Insert the USB port firmly into this terminal. software not recognized Connect this terminal to the PC Verify the L-03F Communication ■To recognize via icon Configuration Files (Drivers) for this terminal ●For Windows 7 functioning properly.→P31, P41 (Start) ...
  • Page 116 PIN1". →P57 this terminal is selected. If it is set to "Lock PIN1", launch the L-03F Check the L-03F Communication "OK" does not Connection Manager, then enter PIN1 code. Configuration Files (Drivers) have been appear after an →P58...
  • Page 117 USB port of PC (If required, apply revision program of OS after installing provided from manufacturer.) the L-03F • Whether this terminal recognizes normally Communication when other USB devices are inserted into Configuration the USB port of PC? Files (Drivers) •...
  • Page 118 An incorrect unblocking PIN code was entered. Please enter the correct unblocking PIN Please try again. (Retry ○/10) code. L-03F is locked because the user failed to You are no longer able to use UIM that unblocking PIN code has been improperly entered input the correct PIN unlocking code 10 10 times in a row.
  • Page 119 For Inquiries Result or When Repair is Required Warranty and After-Sales • Take this terminal to a service center designated by DOCOMO. Be sure to check the operating hours of the Service service center. You must present the warranty. Please note that depending on malfunctions, it may take more than a day to repair.
  • Page 120 If software update is necessary, you will be painting, etc.), it will be repaired only after the modified parts informed at the NTT DOCOMO website with "お知らせ have been restored to the condition at the time of purchase. (Information)".
  • Page 121 Click [Yes] • Update software following the onscreen instructions from Main Specifications here. For details, refer to Software Update procedure on the NTT DOCOMO website. ■ Operating system Note Windows XP Japanese/English version (Service Pack 3) Windows Vista 32bit/64bit Japanese/English version •...
  • Page 122 12.5Mbps for sending speed (bandwidth [20/15/10/ 3G: Approx. xxxmA or lower 5MHz) GPRS: Approx. xxxmA or lower ※ Refer to NTT DOCOMO website for detailed areas that  Average Current consumption while Standby: support Xi. LTE: Approx. xxxmA or lower ※ Receiving data up to 14Mbps, sending data up to 3G: Approx.
  • Page 123 In general, the closer you are to a base station antenna, the lower the power output. Declaration of Conformity European Union Directives Conformance The product "L-03F" is declared to conform with the Statement essential requirements of European Union Directive 1999/ 5/EC Radio and Telecommunications Terminal Equipment Hereby, LG Electronics, Inc.
  • Page 124 Class B Compliance FCC Regulations This device and its accessories comply with part15 of FCC rules. Statement Operation is subject to the following two conditions: • This device & its accessories may not cause harmful This equipment has been tested and found to comply with interference.
  • Page 125 The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless Intellectual Property Rights devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
  • Page 126 • Apple, Apple logo, Mac, Mac OS, Macintosh are registered trademark of Apple Inc. of US and other countries. • Adobe, Adobe Flash Player and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. •...
  • Page 127 Configuring Network ... . .92 Mode Indication Lamp ... 15 L-03F Connection Manager on Mac Connecting this Terminal to a PC. .20 (including a driver) .
  • Page 128 Unlocking PIN1....57 Uninstall L-03F Connection Manager on Mac Resetting this terminal ..61 (including a driver) ..47 Result Codes .
  • Page 129 You can register a confirmation/change of contracts, or request information material at the DOCOMO online. From a PC  My docomo （http://www.mydocomo.com/） ⇒ 各種お申込・お手続き (Subscriptions/Procedures)(Japanese only) ※ "docomo ID/Password" is required if you access the site from a PC. ※ If you do not have or remember the "docomo ID/Password", contact the "docomo Information Center" listed on the back of this manual. ※...
  • Page 130 0120-800-000 (toll free) * Unavailable from land-line phones, etc. * Unavailable from part of IP phones. NTT DOCOMO website http://www.nttdocomo.co.jp/english/     Loss or theft of this terminal or payment of Failures encountered overseas cumulative cost overseas <Network Support and Operation Center> (available 24 hours a day) <docomo Information Center>...

Table of Contents