NTT docomo Optimus LTE L-01D Instruction Manual page 141

a
Connect the microUSB connector
of USB connection cable L02 to the
microUSB connection terminal of the
terminal
• Insert the microUSB connector horizontally with
the surface with the USB mark facing up.
microUSB connector
(with USB mark
facing up)
microUSB connection
terminal
b
Connect the USB connector of USB
connection cable L02 to the USB port of
PC
• The terminal is recognized automatically by PC.
• Request for installation of the device driver may
•
• The "USB connection mode" screen appears on
• The following operations are available from the
USB
connector
c
"Charge only" / "Mass storage" / "PC
sync" / "USB tethering" u "OK"
appear on your PC. If it appears, cancel it.
is displayed in the status bar.
the terminal.
If the "USB connection mode" screen does not
appear, drag or swipe the status bar down
to open the Notification panel, and then tap
"Charge only", "Mass storage", "PC sync", or
"USB tethering".
"USB connection mode" screen.
Charge only Select this to charge only.
(P39)
Mass Select this to synchronize
storage music with Windows Media
Player on a PC and transfer
data between PC and the
terminal by dragging and
dropping. (P131)
PC sync Select this to sync your
contacts and calendars.
USB Select this to use USB
tethering tethering. (P119)
139
File Management