NTT docomo Optimus LTE L-01D Instruction Manual page 29

Notes about Wireless LAN (WLAN)
Wireless LAN (WLAN) uses radio waves to enable
communications between compatible devices, thus
allowing connection to a local area network from
anywhere within range. However, there is a risk of
data interception by malicious third parties unless
security is established. Users are advised to assess
their responsibilities and accordingly configure security
settings.
„ Wireless LAN
Do not use wireless LAN near magnetic devices
such as electrical appliances or AV/OA devices, or in
radio waves.
- Magnetism or radio waves may increase noises or
disable communications (especially when using a
microwave oven).
- When using near TV, radio, etc., reception
interference may occur, or channels on the TV
screen may be disturbed.
- If there are multiple wireless LAN access points
nearby and the same channel is used, search may
not work correctly.
„ 2.4 GHz Device Cautions
The operating frequency band of the WLAN device
is used by home electrical appliances such as
microwave ovens, industrial, scientific, consumer and
medical equipment including premises radio stations
for identifying mobile units used in the manufacturing
lines of plants stations (radio stations requiring no
license) and amateur radio stations (radio stations
requiring a license).
1. Before using the device, confirm that premises
radio stations for identifying mobile units,
specified low power radio stations and amateur
radio stations are not being operated nearby.
2. If the device causes harmful radio interference
to premises radio stations for identifying mobile
units, immediately change the frequency band
or stop use, and contact "docomo Information
Center" on the last page of this manual for
crosstalk avoidance, etc. (e.g. partition setup).
3. If the device causes radio interference to
specified low power radio stations or amateur
radio stations, contact "docomo Information
Center" on the last page of this manual.
Contents / Precautions
27