Updating Software; Software Update - NTT docomo Optimus LTE L-01D Instruction Manual

• Note that the settings and other information may be
cleared (reset) as a result of malfunction, repair or
other handling. In this case, make the settings again.
• When the repair is executed, MAC address of Wi-Fi/
Bluetooth address in the terminal may be changed
regardless of repaired part.
• Magnetic components are used in the parts that are
described below. Do not allow cash cards or other
devices that are vulnerable to magnetism to come
into contact with the phone.
Used parts: speaker, microphone
• If the terminal has gotten wet or moist, immediately
power off the terminal, remove the battery pack, and
bring it to the DOCOMO-specified repair office as
soon as possible. However, note that it may not be
repaired depending on the extent of the damage.
Memory dial (Phonebook function) and
downloaded data
• When you change the model or repair the terminal,
data that has been imported, downloaded or created
by you may be changed or lost. DOCOMO shall have
no liability for any change or loss of any kind. Under
some circumstances, DOCOMO may replace your
terminal with its equivalent instead of repairing it. In
this case, most data from the old terminal cannot be
transferred to the replacement terminal.
218
Appendix / Index

Updating Software

Software Update

Software Update is a function that connects to the
network to check whether software on L-01D needs
to be updated, downloads the software by packet
communication as and when required, and updates the
software.
The NTT DOCOMO website provides information about
required software updates.
There are 3 methods of updating software: Auto Update,
Immediate Update and Scheduled Update.
Auto : Automatically download new software
and install it at a preset time.
Update
: Perform an immediate update
Immediate
whenever you want to update.
Update
: Schedule a time to install the update
Scheduled
package so that the software is
Update
automatically updated at the scheduled
time.