Uim - NTT docomo Optimus LTE L-01D Instruction Manual

UIM

UIM is an IC card that stores informations of each
customer.
You cannot use some of the terminal functions if the
UIM is not inserted. Before inserting or removing
the UIM, you must always turn OFF the power and
disconnect the AC adapter cable.
This terminal uses only the UIM. Bring your miniUIM/
FOMA card to a docomo Shop to exchange it.
UIM security codes
The UIM can set security code named PIN code. This
code is set to "0000" at the time of subscription, but you
may subsequently change it. For details about changing
this security code, refer to "Security Code and UIM
Protection" (P111).
Inserting the UIM
a
Insert a fingernail into the groove in the
back cover, and pull up in the direction
of the arrow (a) while pressing
slightly to remove the back cover
Confirmation and Settings before Using
●
part
a
Groove
31