After returning to Japan
When you return to Japan, the terminal is
connected to DOCOMO network
automatically. If connection is failed, perform
the following operations.
Set "Network Mode" to "LTE (preferred)/
・
WCDMA/GSM" (P.244).
Set "Search mode" to "Automatic" in "Service
・
providers" settings (P.244).
Settings for overseas use
By default, the terminal automatically
searches available network and connect to it.
To switch network manually, set as follows.
Setting network mode
From the Home screen, tap
1
then tap [Settings].
u
Tap [More...]
2
u
networks]
[Network Mode].
Select a network mode you use.
3
You can select from "LTE/WCDMA"
・
"GSM only" and "LTE (preferred)/
WCDMA/GSM". If you select "LTE
(preferred)/WCDMA/GSM" to switch
available network automatically.
,
[Mobile
Setting a network operator
From the Home screen, tap
1
then tap [Settings].
Tap [More...]
2
u
networks]
[Service providers].
If a note appears, tap [OK].
・
Tap [Search mode]
3
To display available networks, tap
・
[Search networks].
From "AVAILABLE NETWORKS",
4
mark a network to use.
❖ Information
If you cannot search networks, disable mobile data
・
communication (P.133) and then search again.
If you set a network manually, the terminal is not
・
reconnected to another network automatically even
if you move out of the network area.
To return to "Automatic", tap [Automatic] in
・
Step 3.
Setting data roaming
From the Home screen, tap
1
then tap [Settings].
Tap [More...]
2
Tap [Data roaming].
3
Read the note and tap [Yes].
4
"Data roaming" checkbox is marked.
・
International roaming
u
[Mobile
u
[Manual].
u
[Mobile networks].
,
,
244