Beam Angle; Lamp - iSolution IR-575S User Manual

2.2 Beam Angle

3. Lamp

In case of replacement of the lamp or maintenance, do not open the
fixture within 15 minutes until the unit cools down after switching off.
MSI 575/ HMI 575 GS/ HMQ 575/2
Because of its high internal pressure, there might be a risk that the Discharge
lamp would explode during operation. The lamp emits intense UV radiation which
is harmful to the eyes and skin. The high luminance of the arc can cause severe
damage to the retina if looks directly at the lamp.
1. Always switch off the mains supply and never handle the lamp or luminaries
when it's hot.
2. Do not touch the bulb with bare hands. If this happens, clean the lamp with
denatured alcohol and wipe it with a lint free cloth before installation.
3. The lamp generates UV radiation. Never operate the lamp without appropriate
shielding.
4. When burning, the lamp operates at high pressure and there is a slight risk of arc
tube rupture. The risk increases with age, temperature and improper handling of
the lamp. Do not use the lamp any longer than its specified life.
IR-575S
65. 3 DMX512 Configuration
8 Channels:
6A
IR-575S
19A