Firmware Upgrade - Extron electronics FOX DA8 Plus User Manual

TIP: If you change the configuration of the DA using the rear panel DA
6. Operate the DA as follows:
• Click the appropriate buttons to mute (gray) or unmute (green) individual outputs or
all outputs.
WARNING:
• Use the drop-down menu to bypass reclocking of the outputs or to select a data
rate at which to reclock the outputs.

Firmware Upgrade

Firmware can be upgraded via the front panel Configuration port of the unit only, using the
Extron Firmware Loader utility from the FOX Extenders Control Program.
Upload replacement firmware as follows:
1. Visit the Extron website, www.extron.com, click the
Firmware
NOTE:
The name, version, release
date, and size shown are
sample values only.
Figure 11.
2.
Select the appropriate firmware file (FOX DA8 Plus) and click
3. Enter the requested personal information and then click
to your computer.
configuration DIP switch (item d
button ( ). This forces the FOX Extenders Control Program to show the new
configuration.
Risk of serious physical injury: The channel mute command
mutes the data on the output only. The output continues to emit
potentially dangerous laser light.
link (see figure 11, below.
Location of Firmware Upgrade Files
in figure 2 and on page 5), click the Refresh
Download
1
3
Download
Download
FOX DA8 Plus • Remote Control
tab, and then click the
1
2
3
.
to copy the firmware
15