Table of Contents
Advertisement
Basic Operation
5.9.3
New password
Here you can assign a new password.
5.10
Setting Time
Reasonable operation of the receiver requires setting of system time. By default, the receiver is set to
5
GMT
Usage, i.e. date and time are taken from the received signal. Time zone is set to GMT + 1 hour
(+ 1:00) by default. Required changes can be made in the sub-menu Time:
1. Select the menu System Setup (see above).
2. Select the sub-menu Local Time Setting and confirm by pressing OK.
3. Select the item GMT Usage and switch on or off GMT Usage.
On = automatic time setting via satellite signal is activated.
Off = automatic time setting via satellite signal is deactivated.
4. Select the item GMT offset and select your time zone, for example, the time zone of Germany,
Austria and Switzerland is GMT offset +1:00.
5. Select the item Summer Time and switch Summer Time Off, On or Auto (the setting is done
automatically).
6. If automatic time setting (GMT Usage) is switched off, then date and time should be manually
entered: For this, select the item Date, select the position to be changed by using the keys V+ / V-
and enter the current date by using the numeric keys. Then, select the item Time, select the posi-
tion to be changed by using the keys V+ / V-, and enter the current time by using the numeric
keys.
7. Leave the menu by pressing EXIT until the screen shows the TV picture.
5.11
TV
You have several possibilities to select a channel:
•
Direct channel selection;
•
Channel selection via selection window; and
•
Channel selection via search function;
as explained in the following sections.
5.11.1
Direct Channel Selection
Select the desired channel by using the keys PR+ and PR-.
5.11.2
Channel Selection via Selection Window
1. Press the OK key to display a selection window with all available channels.
2. Select the channel list with the desired channel by using the keys V+ / V- or press the FAV key to
select from your favorite lists.
3. Select the channel to be displayed by using the keys PR+ and PR- for single steps or
steps of ten, and confirm your selection by pressing OK. The channel will be correspondingly
switched.
4. Press OK or EXIT to close the selection window.
5
GMT = Greenwich Mean Time
16
As-delivered the password is set to 0000.
and
for
Advertisement
Table of Contents
