Lexicon RV-8 Service Manual page 75

Lexicon
5. Carefully slide the Main board to the front of the RV-8 and up and out of the chassis.
6. Store it in a static-free area.
To remove the front panel:
1. Place the RV-8 upside down with the front panel facing you.
2. Locate and remove the two screws and ribbon cable J20 and disconnect it from the Main board.
3. Turn the RV-8 over. Locate and remove the two screws holding the front panel to the chassis.
4. Carefully pull the front panel away from the chassis and store it in a static-free area.
5-21