Lexicon RV-8 Service Manual page 44

11. Press the Menu arrow. The DVD1 INPUT SETUP menu will now be displayed.
12. Using the Menu arrow, scroll to the VIDEO IN parameter and select it by pressing the Menu
arrow.
13. The DVD1 VIDEO IN menu will be displayed. Using the Menu
parameter and select it by pressing the Menu
VIDEO IN menu.
14. Using the Menu arrow, scroll to the COMPONENT IN parameter. Select it by pressing the Menu
arrow.
15. The DVD1 COMPONENT IN menu will be displayed.
16. Using the Menu arrow, highlight the VIDEO parameter and press the Menu
This will set the RV-8 to up-convert composite and S-video inputs to component video.
17. Press the Menu arrow three times to exit to the SETUP menu.
18. Using the Menu arrow, scroll down to the DISPLAYS parameter and select it by pressing the Menu
arrow.
19. The DISPLAY SETUP menu will open with the ON-SCREEN DISPLAY parameter highlighted. Select
it by pressing the Menu
20. The ON-SCREEN DISPLAY menu will open with the STATUS parameter highlighted. Select the
STATUS parameter by pressing the Menu
"ALWAYS OFF."
21. Press the Menu arrow to exit the menu structure.
22. The video path is now set for testing.
Test:
1. Load a disc into the DVD player and press Play.
2. Verify a clean undistorted picture appears on the monitor.
S-video Input to Component Video Output Test
This test will verify the Video Up-Conversion functionality of the RV-8.
Setup:
1. Connect the S-video output from the DVD player to the RV-8's S-video input 1.
2. Connect the RV-8 main component video output to the component video input of the video monitor.
3. Turn on the DVD player, monitor, and the RV-8.
4. The monitor should display a blue screen.
5. On the RV-8 remote control, press the MAIN button, then press the DVD1 button to select DVD1 as
the input for testing the video paths.
6. Press the remote control Menu
7. Using the Menu arrow, scroll down to SETUP. Press the Menu
menu.
8. The SETUP Menu will appear with INPUTS highlighted.
9. Press the Menu arrow again to open the INPUT SETUP menu.
4-26
arrow. Press the Menu
arrow.
arrow and change the value of the parameter to
arrow to display the Main Menu.
RV-8 Service Manual
arrow, scroll to the COMPOSITE-1
arrow to exit the DVD1
arrow to select it.
arrow to select the SETUP