Barcode Scanner (Code Type Selection) - MobileDemand xTablet T1400 User Manual

Barcode Scanner Configuration (Code Type Selection)
The xTablet T1400 is optionally equipped with a barcode scanner, this section of user manual
explains how the barcode scanner can be configured differently via software (Intermec EasySet)
to read different barcode types and to improve reading speed and reading of poor quality
barcodes. The barcode scanner is configured with Intermec EasySet application. The latest
version can be downloaded at the following link:
http://intermec.custhelp.com/app/answers/detail/a_id/5760
Barcode Scanner Configuration Instruction
In order to configure the barcode scanner, the tablet device needs to be restarted to reset the
hardware devices on-board to allow for configuration.
Note:
• Throughout the barcode scanner configuration, DO NOT try and trigger the barcode
scanner by press the Function button on the device. Doing so will prevent the barcode
scanner from being correctly configured.
Perform the following to configure barcode scanner for different code types:
1. Turn-off all the running applications and restart the tablet.
2. Once the tablet boots up, wait for the Hot-Tab utility to start up.
3. Open Hot-Tab utility, and tap on the " Device " icon.
4. Turn on the " Barcode " device by tapping on the Icon. Make sure the " Barcode " icon is
orange to indicate barcode scanner is on. DO NOT try and trigger the barcode scanner by
press the Function button on the device at this point. Doing so will prevent successful
configuration.
5. Execute the " Easyset " barcode scanner configuration application by tapping on its icon:
20 xTablet T1400 User Guide