MobileDemand xTablet T1400 User Manual page 25

8. At this point, the barcode scanner device is selected and next step is barcode code type
selection.
9. On the navigation pane on the left, select the option " 5. Symbologies ". A full list of available
code types will be listed in this navigation pane.
10. Navigate to the code type of interest and double click to show its configuration options as
shown in the screen capture below (i.e. screen capture selects code type "Code 11"):
11. Double click on " Enable " to enable the code type for barcode scanner or double click on
" Disable " to disable the code type for barcode scanner.
12. Go through the entire code type list and enable/disable each barcode code type of interest.
13. Once all the code types of interest are configured, close the " EasySet " application to finish
barcode scanner configuration.
Note: For more information on how to use the " EasySet " application, please refer to the
complete EasySet User Manual from Intermec:
http://intermec.custhelp.com/app/answers/detail/a_id/5760
22 xTablet T1400 User Guide