T1270 Copyright and Trademarks Notice All marks and names mentioned may be trademarks of their respective owners. No warranty as to accu- racy or completeness is expressed or implied. We reserves the right to make changes to this document without prior notice.
Page 4
T1270 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 5
T1270 CE Conformity This device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive. Battery Regulations European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted house- hold waste.
T1270 Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep this equipment away from humidity and high temperature. The openings on the enclosure are used for air convection to prevent the equipment from overheating.
Page 7
T1270 Always keep strong magnetics or electrical objects away from the tablet. To avoid damage or electrical shock never pour liquid into the opening. If any of the following situations arise, have the equipment checked by a service personnel: The power cord or plug is damaged.
T1270 Introduction Congratulations on the purchase of MobileDemand’s xTablet T1270. Designed and tested to meet our ® exacting standards ensures dependability and customer satisfaction. Refer to this manual to guide you through the basic functions and features. Unpacking Unpack the shipping carton and check all items carefully. If any item is damaged or missing contact your local dealer immediately.
T1270 Product Overview 1. Status LED Power Battery LED glows when the tablet power is turned on. LED glows green when the battery is being charged. • • LED flashes when the tablet goes to the sleep state. LED turns glowing amber while the battery is in low ca- •...
Page 10
T1270 1. Barcode scanner (optional) 1 2 3 4 1. DC-in Jack 2. Reset Hole 3. Headphone Jack 4. USB 3.0 Port 5. RJ-45 Connector 6. Micro HDMI Port 1. Dock Connector 2. Kensington Lock 3. Dock Guide Holes...
Page 11
T1270 1. Battery Latch 2. Fan 3. NFC (optional) 4. Finger Print Reader (optional) 5. Function Key F1 - Trigger Barcode Scanner F2 - Enable/Disable Stealth Mode (Turns off LEDs, Wi-Fi, BT, LTE, Backlight, Speaker) F3 - User Configurable within Predefined Options...
T1270 Specifications The specifications listed here is for reference only, and may change without notice. DIMENSIONS 12.5”W x 8.4”H x 1.1”D CAMERA Front - 2 MP 4.3lbs (1.95kg) - base config Rear - 8 MP DISPLAY 12.2” Capacitive OPTIONAL 3D CAMERA CHARACTERISTICS...
AC/DC Adapter Ensure the xTablet T1270 is connected to an AC power source via the AC adapter before turning it on for the first time. If the xTablet automatically shuts down due to low battery power, it is likely to cause system failure.
T1270 Battery This Tablet is equipped with a built-in high-capacity Lithium-ion Polymer battery pack. The rechargeable Lithium-ion Polymer battery pack is an internal power source. The battery pack may be damaged if users attempt to disassemble it. The limited warranty will be voided if the battery pack is disassembled by non-authorized technicians.