Imager/Bar Code Scanner (Optional) - MobileDemand xTablet T7200 User Manual

Imager/Bar Code Scanner (Optional)

The ScanWizard application is installed on the xTablet T7200 desktop as a shortcut for you. It
activates the bar code scanner that is built into your xTablet T7200, such as the Intermec EA15 2-D
Imager Engine. Contact the MobileDemand technical support at 319-363-4121 for assistance.
To configure the bar code scanner
1. Double-tap the ScanWizard shortcut icon on the xTablet T7200 desktop to access the
MobileDemand Scanner Wizard, then tap Continue.
2. In the Wedge Setup screen, do the following:
a. Select the applicable Driver Registry Location/Startup Mode option.
b. In the Please pick your scanner type group, select your scanner type, then click Autodetect
Scan Engine for the wizard to determine your scanner type for you.
c. Complete the applicable information in the rest of this screen.
d. Click Next to continue.
3. In the Final Setup screen, check any of the options that apply, then click FINISH to start using your
bar code scanner.
23