MobileDemand xTablet T1400 User Manual page 12

Inserting Battery Pack
To insert the included standard battery pack into the xTablet T1400:
1. Disconnect any cords connected to the xTablet T1400.
2. Turn the xTablet T1400 over, back facing up.
3. Locate the Battery Lock and push it to the "Unlocked" position.
4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
5. Insert the battery on the connector-pins side first, and then lower the battery into the
battery compartment. Continue to hold the Battery Release Slider before battery is fully
inserted.
6. Make sure the battery is completely lowered into the compartment before letting go the
Battery Release Slider. The edges of the battery will be flat against the housing once fully
inserted
Removing the Battery Pack
1. Shut down the xTablet T1400 (or put it to sleep). Disconnect any cords connected to the
computer.
2. Turn the xTablet T1400 over, back facing up.
3. Locate the Battery Lock and push it to the "Unlocked" position.
4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
5. Lift the battery out using the opening on side of battery compartment.
xTablet T1400 User Guide 9