T1190 Copyright and Trademarks Notice All marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. We reserves the right to make changes to this document without prior notice.
Page 4
T1190 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pur- suant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
T1190 IC Statements This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
T1190 Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep this equipment away from humidity and high temperature. The openings on the enclosure are used for air convection to prevent the equipment from overheating.
Page 7
T1190 Always keep strong magnetics or electrical objects away from the tablet. To avoid damage or electrical shock never pour liquid into the opening. If any of the following situations arise, have the equipment checked by a service personnel: •...
T1190 Introduction Congratulations on the purchase of MobileDemand’s rugged xTablet T1190. Designed and tested to ® meet our exacting standards ensures dependability and customer satisfaction. Refer to this manual to guide you through the basic functions and features. Unpacking Unpack the shipping carton and check all items carefully.
T1190 Product Overview Front View 1. Front Camera 2. Status LEDS B. Wireless LAN (WiFi) C. Battery A. Power • LED glows when WLAN • LED glows when the battery is being charged. • LED glows when the tablet (WiFi) function is enabled.
Page 10
T1190 Top View 1. Power Button The xTablet T1190 must be connected with AC power before being powered on for the first time. Press and hold the power button for 8 seconds to shut down the tablet. 2. Barcode Scanner...
Page 11
T1190 Left Side View 1. Volume Up + / Volume Down - Button 2. Nano SIM Card Reader The built-in card reader supports various types of 4G/LTE 3. Reset Hole Insert straightened paperclip into the reset hole if tablet cannot be turned off normally or is unresponsive after pressing power button for 8 seconds.
Page 12
T1190 Back View 1. Rear Camera This built-in rear camera can be used for photos, video recording, conferencing, and other interactive applications. 2. Flash 3. F2 Function Programmable function key and default setting is Barcode Scanner trigger function. (optional) User Defined programmable function key.
T1190 Specifications The specifications listed here are for reference only, and may change without notice. DIMENSIONS 283.4 W x192.0 H x 15 D mm CAMERA Front - 2MP Weight - 2.3lbs Rear - 8MP AF with flash Hello Camera DISPLAY 10.1”...
AC/DC Adapter Ensure the xTablet T1190 is connected to an AC power source via the AC adapter before turning it on for the first time. If the xTablet automatically shuts down due to low battery power, it is likely to cause system failure.
T1190 Battery This Tablet is equipped with a built-in high-capacity Lithium-ion Polymer battery pack. The rechargeable Lithium-ion Polymer battery pack is an internal power source. The battery pack may be damaged if users attempt to disassemble it. The limited warranty will be voided if the battery pack is disassembled by non-authorized technicians.