[D-6-6] Delete Function Test - Yamaha 2007 XP500 Service Manual

a. ABS warning light
b. ON
c. Main switch on
d. Main switch off
7. Turn the main switch off.
8. Disconnect the test coupler adaptor from the test coupler and install the protective cap onto the test
coupler.
NOTE:
Do not forget to install the protective cap onto the test coupler.
ECA15B3027
CAUTION:
Since the ECU (ABS) remains in the memory until the malfunction code is deleted, always delete
the malfunction code when the service work is finished.
EAS15B3038

[D-6-6] DELETE FUNCTION TEST

1. Place the vehicle on the centerstand.
2. Set the main switch to "OFF".
3. Connect the test coupler adapter to the test coupler.
4. Set the main switch to "ON".
5. Check:
ECU (ABS) voltage
G
Connect the pocket tester (DC 20 V) to the ECU (ABS) coupler.
Tester positive probe → Brown/White "1"
Tester negative probe → Black "2"
Lower than 12.8 V → Charge or replace the battery.
ABS (ANTI-LOCK BRAKE SYSTEM) (XP500A)
Battery voltage
Higher than 12.8 V
8-94
e. Flashing
f. 2 seconds
g. 3 seconds
h. 0.5 seconds