Yamaha 2007 XP500 Service Manual page 202

Frok seal driver weight
90890-01367
Replacement hammer
YM-A9409-7
Fork seal driver attachment (ø41)
90890-01381
Replacement 41 mm
YM-A5142-2
7. Install:
Oil seal "1"
New
G
(with the fork seal driver weight "2" and fork
seal driver attachment "3")
ECA14220
CAUTION:
Make sure the numbered side of the oil seal
faces up.
NOTE:
Before installing the oil seal, lubricate its lips
G
with lithium soap base grease.
Lubricate the outer surface of the inner tube
G
with fork oil.
Before installing the oil seal, cover the top of
G
the front fork leg with a plastic bag "4" to protect
the oil seal during installation.
8. Install:
Oil seal clip "1"
G
NOTE:
Adjust the oil seal clip so that it fits into the outer
tube's groove.
9. Install:
Dust seal "1"
G
(with the fork seal driver weight "2" )
Frok seal driver weight
90890-01367
Replacement hammer
YM-A9409-7
10.Fill:
Front fork leg
G
(with the specified amount of the recom-
mended fork oil "a")
4-62
FRONT FORK
New