Multi-Function Display - Yamaha NEO'S 4 2008 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display

3
1. Clock
2. Speedometer
3. Fuel gauge
4. Oil change indicator
5. Odometer/tripmeter/fuel reserve tripmeter
6. "RESET/SELECT" button
TIP
The multi-function display performs
the following self-test for three
seconds in order to check the electri-
cal circuit.
G
The speedometer digits display
from 0 to 99, and then from 99 to
0 in kilometers. If the speedome-
ter is set to miles, the digits dis-
play from 0 to 65, and then from
65 to 0.
G
EAUS1470 All LCD segments and warning
lights come on and then go off.
s WARNING
s
Be sure to stop the vehicle before
making any setting changes to the
multi-function display. Changing
settings while riding can distract
the operator and increase the risk
of an accident.
The multi-function display is equip-
ped with the following:
G
a digital clock
G
a digital speedometer
G
an odometer (which shows the
total distance traveled)
G a tripmeter (which shows the dis-
tance traveled since it was last
set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled on
the fuel reserve)
G an oil change indicator (which
shows when the engine oil
should be changed)
G
a fuel gauge
G
a self-diagnosis device
TIP
G
G
EWA12312
To set the clock:
1. Select the odometer and push
2. When the hour digits start flas-
3-3
Be sure to turn the key to "ON"
before using the button.
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between miles
and kilometers and vice versa,
when the main switch is turned to
"ON", press the button for at
least eight seconds.
the button for at least three
seconds.
hing, push the button to set the
hours.