Programming Of Dsc Identity Number - Simrad Shipmate RS8400 Introduction Manual

Programming of DSC identity number. The DSC number issued by the authori-
ties can be programmed directly from the handset. If a mistake is made, the num-
ber can be altered for as long as the unit is still ON, but once the power has been
switched OFF, the numbers will be fixed in the memory and can only be repro-
grammed by an authorized dealer.
Important! Connected navigator must be disconnected during programming.
Example of how to program a DSC number e.g. 1 2 3 4 5 6 7 8 9 (+0).
Add 0 to a 9 digit DSC number.
á
E
6 7 8
á
E
1 2 3
Before switching the unit OFF, check that the numbers are entered correctly:
á
E
á
E
Programming of ATIS identity number. The ATIS number is issued by the
authorities for river traffic in regional areas. Example of how to program an ATIS
number e.g. 9 1 2 3 4 5 6 7 8 9 (the first digit will normally be a 9):
á
E
5 6 7
á
E
9 1 2
Before switching the unit OFF, check that the numbers are entered correctly:
á
E
á
E
6
9 2 E
9 0
9 3 E
4 5
9 7 E
9 8 E
8 2 E
8 9
8 3 E
3 4
8 7 E
8 8 E
Call 1st address: "L"
E
Key in the 5 least significant digits.
Call 2nd address: "M"
E
Key in the 5 most significant digits.
DSC - least significant digits.
- most significant digits.
Call 1st address: "L"
E
Key in the 5 least significant digits.
Call 2nd address: "M"
E
Key in the 5 most significant digits.
ATIS - least significant digits.
- most significant digits.