Edit Of Scan Programme - Simrad Shipmate RS8400 Introduction Manual

Edit of Scan Programme memory. Channels selected for Scan programme will
be retained in the memory of the set, even if power is switched off. When the
memory is full (ten channels), the first one entered is overwritten by the last one
entered.
13
10
1 3
INT
10
0 #
13 5 18
10
9 9
To insert new channels in the Scan Programme
#
memory, e.g. Channel 13.
To delete all channels stored in Scan Programme
memory.
Display the channels stored in Scan Programme
memory.
#
21