Table of Contents
Advertisement
7
PROGRAMMING AND CONFIGURATION
Introduction
All Transmitting / Receiving characteristics of the H2 Series radio telephones
are stored in Non Volatile Memory (NVM). The NVM of any H2 Series radio can
be programmed with new characteristics using the programming kit, Part
Number XXXXX.
7.1
Configuration Settings. The following features are available:
COUNTRY
SECOND MODE
SCANNING
CHANNEL 10 SCAN
DUAL WATCH
TRI WATCH
PRIORITY CHANNEL
FIRST KEY BEEP
STARTUP CHANNEL (SC)
WATCH CHANNEL (WC)
USA / CANADA
WEATHER CHANNELS
DRAFT
Selects primary mode. NVMs with INT
(International) selected for the FIRST
COUNTRY flag will receive on the INT
Rx frequencies. The radio can be
switched to USA with weather
channels if the VOL key is depressed
on power up unless the SELECTED
MODE ONLY flag is set.
(SECOND MODE – YES).
Enables or disables switch to USA with
weather channels.
Enables and disables SCAN and
MEMORY SCAN functions.
Enables or disables Channel 10 from
SCAN facility, (Scanning Channel 10 is
not permitted in some countries).
Enables or disables DUAL WATCH
Enables or disables TRI WATCH
Selects alternate channel to be
monitored when DUAL WATCH
selected.
Enables or disables KEY BEEP
Selects channel to be displayed on
power up, usually Channel 16
Selects third channel to be monitored
when TRI WATCH selected.
Enables or disables USA weather
channels.
DRAFT
17
Hide quick links:
Advertisement
Table of Contents
