Position Input (Rs8300 Sos Only) - Simrad Shipmate RS8400 Introduction Manual

Position Input (RS8300 SOS only) is automatically updated if you have a GPS
navigator connected to the VHF. Without a navigator, the information can be en-
tered manually from the keypad via the Position menu.
LA XXXXX
16
E 16
LA 12N34
16
1 2
3 4
LO 103E52
16
1 0
à
5
12
In the Position menu, the display will show the
latitude of the last transferred position from a
GPS navigator.
Note! The display is not updated while the menu
is active.
If no position is displayed, the data can be entered
manually.
F Press the E key to exit the Position menu, or...
Enter latitude e.g. 12N34
Toggle between N/S with ß / à
Go to longitude with â
ß
Enter longitude e.g. 103E52
Toggle between E/W with ß / à
Go to UTC time with â
3
2