Intercom (Not Rs8300 Standard) - Simrad Shipmate RS8400 Introduction Manual

The Intercom (not available in RS8300 standard) facility allows private conver-
sation between the two handsets, or messages over separate loudspeakers, provid-
ed there is no radio traffic on the channel selected.
INTERCOM
10
E 2
INT SB
10
22
Pick up the handset and press the E key and the 2
key to activate Intercom.
A beep sequence will sound through the loud-
speakers.
Press the PTT key to give a message over the
loudspeakers, or to communicate with the second
handset when it is out of the cradle.
Intercom will automatically go to stand-by when
a radio signal is received. Intercom is cancelled
when both handsets are returned to their cradles.