Structure Of The Control Preset Adj Menu; Setting Lists In The Control Preset Adj Menu - Sony BVM-D9H1j Operation Manual

A
Preset Adjustment of the Picture Level Control
Knobs — CONTROL PRESET ADJ Menu
Overview
The preliminary adjustments of chroma, phase,
contrast and brightness are carried out with the
CONTROL PRESET ADJ menu to set the preset
values to the knobs for the above-mentioned
adjustments.

Structure of the CONTROL PRESET ADJ Menu

Level 1
MANUAL A1
AUTO A2

Setting Lists in the CONTROL PRESET ADJ Menu

This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see "About
menu numbers" on page 26(E).
Level 2
CHROMA
PHASE
CONTRAST
BRIGHT
FULL FIELD WHITE 100%
8COLOR BAR 100%
8COLOR BAR 75%
SMPTE COLOR BAR
EIA COLOR BAR
Preset values can be set in the following two ways:
• Adjustment with the MANUAL adjustment knobs
(MANUAL menu)
• Automatic adjustment (AUTO menu)
An external color bar signal is necessary.
Note
After installing the optional board, carry out AUTO
adjustment.
• The arrow mark (÷) refers you to another setting list
that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not have
any sub-list.
31
(E)