Installation Of The 4:3 Mask; Bvm-D9H1U/D9H1E/D9H1A/ D9H5U/D9H5E/D9H5A; Bvm-D14H1U/D14H1E/D14H1A; D14H5U/D14H5E/D14H5A - Sony BVM-D9H1j Operation Manual

Installation of the 4:3 Mask

When the aspect ratio is switched from 16:9 to 4:3,
replace the 16:9 mask with the supplied 4:3 mask.
BVM-D9H1U/D9H1E/D9H1A/
D9H5U/D9H5E/D9H5A
Installing the 4:3 mask
1
Remove four screws from both sides of the monitor
and then remove the16:9 mask.
2
Install the 4:3 mask (supplied) and fix both sides
with four screws.
Replacing the 16:9 mask
Remove the 4:3 mask and replace the 16:9 mask using
the same procedures as those for installing the 4:3
mask.
24
(E)

BVM-D14H1U/D14H1E/D14H1A/

D14H5U/D14H5E/D14H5A

Installing the 4:3 mask
1
Remove the 16:9 mask.
2
Install the 4:3 mask (supplied).
1 Attach the lower portion of the mask.
2 Attach the upper portion of the mask by
pressing it until the click.
Replacing the 16:9 mask
Remove the 4:3 mask and replace the 16:9 mask using
the same procedures as those for installing the 4:3
mask.