Installing The Starter Clutch; Installing The Generator - Yamaha 2004 YP400 Service Manual

STARTER CLUTCH AND GENERATOR
3
EAS00355

INSTALLING THE STARTER CLUTCH

1. Install:
NOTE:
_
• While holding the generator rotor 2 with the
• Do not allow the sheave holder to touch the
EAS00354

INSTALLING THE GENERATOR

1
1. Install:
2
NOTE:
_
• Clean the tapered portion of the crankshaft
• When installing the generator rotor, make
1
2. Tighten:
2
NOTE:
_
• While holding the generator rotor 2 with the
• Do not allow the sheave holder to touch the
5 - 54
• starter clutch bolts 1
30 Nm (3.0 m · kg, 22 ft · lb)
sheave holder 3, tighten the starter clutch
bolts.
projection on the generator rotor.
Sheave holder
90890-01701, YS-01880-A
• starter clutch gear 1
• woodruff key 2
• generator rotor
• washer
• generator rotor nut
and the generator rotor hub.
sure the woodruff key is properly seated in
the keyway of the crankshaft.
• generator rotor nut 1
130 Nm (13.0 m · kg, 94 ft · lb)
sheave holder 3, tighten the generator rotor
nut.
projection on the generator rotor.
Sheave holder
90890-01701, YS-01880-A
ENG
LT