Yamaha 2004 YP400 Service Manual page 199

b
a
1
HANDLEBAR
9. Install:
• right handlebar switch 1
WARNING
_
Make sure the throttle grip operates
smoothly.
NOTE:
_
Align the projection a on the right handlebar
switch with the hole b in the handlebar.
10.Install:
• grip end (left)
NOTE:
There should be 1 ~ 3 mm (0.04 ~ 0.12 in) of
clearance a between the throttle grip and the
grip end.
11.Install:
• grip end (right)
NOTE:
There should be 2.4 ~ 4.4 mm (0.09 ~ 0.17 in)
of clearance a between the throttle grip and
the grip end.
12.Adjust:
• throttle cable free play
Refer to "ADJUSTING THE THROTTLE
CABLE FREE PLAY" in chapter 3.
Throttle cable free play (at the
flange of the throttle grip)
3 ~ 5 mm (0.12 ~ 0.20 in)
4 - 59
CHAS