Changing The Transmission Oil - Yamaha 2004 YP400 Service Manual

CHANGING THE TRANSMISSION OIL

1
CHANGING THE ENGINE OIL/
16.Reset:
• engine oil change indicator
M MMM
a. Turn the key to "ON".
b. Hold the reset button 1 pushed for two to
eight seconds.
c. Release the reset button and the engine oil
change indicator will go off.
1
NOTE:
If the engine oil is changed before the engine
oil change indicator comes on (i.e. before the
periodic engine oil change interval has been
reached), the indicator must be reset after the
engine oil change for the next periodic engine
oil change to be indicated at the correct time.
To reset the engine oil change indicator before
the periodic engine oil change interval has
been reached, follow the above procedure, but
note that the indicator will come on for 1.4 sec-
onds after releasing the reset button, other-
wise repeat the procedure.
L LLL
17.Install:
• storage box lower plate
Refer to "RIDER SEAT AND STORAGE
BOX".
CHANGING THE TRANSMISSION OIL
1. Stand the scooter on a level surface.
NOTE:
• Place the scooter on a suitable stand.
• Make sure that the scooter is upright.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Place a container under the transmission oil
drain bolt.
4. Remove:
• transmission oil filler plug
• transmission oil drain bolt 1
5. Drain:
• transmission oil
(completely from the transmission case)
6. Install:
• transmission oil drain bolt
3 - 26
M MMM M M MMM M M MMM M
L LLL L L LLL L L LLL L
20 Nm (2.0 m · kg, 14 ft · lb)
CHK
ADJ
M MMM M M MMM M MMM
L LLL L L LLL L LLL