Yamaha 2004 YP400 Service Manual page 113

1
CHANGING THE COOLANT
7. Install:
• copper washer
• coolant drain bolt
8. Connect:
• coolant reservoir hose
9. Remove:
• air bleed bolt (coolant) 1
10.Fill:
• cooling system
(with the specified amount of the recom-
mended coolant)
NOTE:
The specified amount of coolant is a standard
amount. Fill the cooling system with coolant
until coolant comes out of the air bleed bolt
hole.
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
WARNING
_
• If coolant splashes in your eyes, thor-
oughly wash them with water and consult
a doctor.
• If coolant splashes on your clothes,
quickly wash it away with water and then
with soap and water.
• If coolant is swallowed, induce vomiting
and get immediate medical attention.
3 - 34
CHK
ADJ
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
Recommended antifreeze
High-quality ethylene
antifreeze containing corrosion
inhibitors for aluminum engines
Mixing ratio
1:1 (antifreeze:water)
Quantity
Total amount
1.57 L (1.38 Imp qt, 1.66 US qt)
Coolant reservoir capacity
0.32 L (0.28 Imp qt, 0.34 US qt)
Up to the maximum level mark
glycol