Preparations; Turning On/Off The Scanner; Automatic Power-Off Function; Placing Original(S) - Mustek iDocScan D20 User Manual

Turning On/Off the Scanner

Power Button
1. Press the Power Button to turn on the scanner.
 The Power LED turns GREEN when the
scanner is turned on.
2. Your computer then recognizes that a
scanner has been plugged into the USB
Port and automatically loads the Hotkey
Utility ( ) in the taskbar to run the scanner.
 You may need to click on the "Show hidden icons"
arrow in order to find the Hotkey Utility icon (
To turn off the power press the Power Button for 3
seconds until the Power LED turns off.

Automatic Power-Off Function

By default, when the scanner has no operations for 15 minutes, the
scanner will automatically turn the power off, and the Hotkey Utility
will then be disabled ( ) when the power is off.
To resume the function and the Hotkey Utility (
Button to turn on the scanner.

Placing Original(s)

Inspecting Original(s)

Please inspect your original(s) before scanning to prevent paper jams
and protect documents.

Do not use sheets other than those with the specified size, quality,
and weight as the Specification (p.24) to feed in the ADF tray.

Do not mix different paper types and paper sizes.

Ensures staples and paper clips have been removed prior to
scanning as they may cause damage to the scanner and document.

Do not feed paper with wet ink or liquid correction fluid, curls,
wrinkles, folds, irregular shapes or tears into the ADF tray.

Do not scan fragile photos and important originals using the ADF as
misfeeding may wrinkle or damage them. Use the flatbed instead.
).

Do not overload the ADF Input Tray. The paper capacity is 60 sheets
for the plain paper or 20 cards for the business cards.

If a stack of plain paper or business cards cannot be fed into the
ADF properly, try to reduce the number of plain paper or cards in the
stack.

When scanning a stack of small business cards or other small paper,
place the long side of the paper parallel with the Width Guides.

We recommend that long paper to be fed in ADF Input Tray one
), press the Power
sheet at a time.

PREPARATIONS

9