Clearing Document Jams In The Adf; Tips For Preventing Document Jams - Mustek iDocScan D20 User Manual

3. Hold the spare Separation Pad and align the springs with the slots
on the ADF Cover. Press each spring and then push downward until
it locks into place.

Clearing Document Jams in the ADF

If a document jam occurs, a mechanical noise will produce and an error
message will appear. Carefully remove the jammed paper as following.
1. Turn off the power, and then lift open the ADF Cover.
Carefully remove the jammed document by pulling evenly with both
2.
hands to avoid tearing.
3. Close the ADF Cover back in place.

Tips for Preventing Document Jams


Do not overload the ADF Input Tray. The paper capacity is 60
sheets for the plain paper or 20 cards for the business cards.

Do not remove paper from the ADF Input Tray during scanning.

Do not scan folded, wrinkled, curled, torn paper, or paper with
clips or staples.

Fan and straighten paper before placing in the ADF Input tray.

Do not mix different paper types and paper sizes.

Use only the standard size and weight of paper as specification.

Use the flatbed to scan very thick, extra thin, fragile, glossy paper
or other items that cannot go through the Automatic Document
Feeder.

When scanning the small business cards or other small paper,
place the long side of the paper parallel with the Width Guides.

Make sure the Width Guides touch the edges of the paper.
MAINTENANCE
21