Placing Documents In The Adf - Mustek iDocScan D20 User Manual

PREPARATIONS

Placing Documents in the ADF

1. Fan the stack of the documents to loosen them.
2. Straighten the top edges of the documents on a level of surface.
3. Slightly lift the ADF Input Tray until the legs are fully extended and
held in position.
10
4. Slide either side of the Width Guide to the mark indicating the
desired paper size.
5. Place your single-sided documents face down with the tops in first,
and then slide the stack into the ADF tray.
Place your double-sided documents with the first page face down
with the tops in first, and then slide the stack into the ADF tray.
 Verify that the Width Guides touches the edges of the stack.
A5
B5
A4
LTR